dan19
10-18 12:22 PM
One of my friends got a similar one. In that case the DOL pointed to one another candidate(say Mr.A's) who applied for the same job, and was more qualified than my friend in terms of years of experience. The DOL asked why Mr.A wasn't hired.
My friend's company sent a new letter to Mr.A asking whether he was still available. Mr.A did not reply back.
Since Mr.A did not reply back, the company understood that Mr.A is no longer interested in the job.
The company then sent back the rebuttal stating the new efforts made.
The DOL then approved:) the case.
I received a letter from BEC and it says
This Notice of Findings is the Department’s statement of its intent to deny the application.
The following reasons were attached in the document:
1. - The job opportunity has been and is clearly open to any qualified U.S worker.
The case file indicates that telephone calls were placed made to U.S. applicants but the calls failed to reach the following applicants: A,B,C (name of the applicants)
Although telephone calls were unsuccessfully places to the three U.S. applicants, no certified mailing or other attempts were made to contact the applicants. An employer must prove that its overall recruitment efforts were in good faith.
The employer may rebut this finding by:
Providing documentation that certified mail was sent to the four applicants which demonstrates the employer made the minimally acceptable effort to recruit U.S. applicants.
2. The department of labor requires that when submitting an Application for Alien Employment Certification the case file must contain two sets of original ETA 750’s Parts A and B. your case file contains only one set of original ETA750’s. The other set of 750’s in the case file are photocopies. ETA 750’s with photocopied signatures are not acceptable for processing. In order to continue processing the Application for Alien Employment Certification you must send an additional set of original ETA 750’s.
A copy of the Form ETA 750, parts A and B, have been returned in the event that any changes are necessary. The amended copies must be returned with your resubmission. Any amendments made to the ETA 750, Part A, must be initialed and dated by the employer: and any amendments made to the ETA 750, Part B, must be initialed by the alien, as appropriate.
It is the employer’s responsibility to submit the rebuttal in a timely manner directly to the certifying officer.
I got already my 7th year extension and it valid till Nov 2007. I spoke with my attorney and he seems to be positive, but he could only able to find two of the three candidates email correspondence.
Please let me know if you have faced similar situation or any suggestions. What is the possibility of my case gets approved?
My friend's company sent a new letter to Mr.A asking whether he was still available. Mr.A did not reply back.
Since Mr.A did not reply back, the company understood that Mr.A is no longer interested in the job.
The company then sent back the rebuttal stating the new efforts made.
The DOL then approved:) the case.
I received a letter from BEC and it says
This Notice of Findings is the Department’s statement of its intent to deny the application.
The following reasons were attached in the document:
1. - The job opportunity has been and is clearly open to any qualified U.S worker.
The case file indicates that telephone calls were placed made to U.S. applicants but the calls failed to reach the following applicants: A,B,C (name of the applicants)
Although telephone calls were unsuccessfully places to the three U.S. applicants, no certified mailing or other attempts were made to contact the applicants. An employer must prove that its overall recruitment efforts were in good faith.
The employer may rebut this finding by:
Providing documentation that certified mail was sent to the four applicants which demonstrates the employer made the minimally acceptable effort to recruit U.S. applicants.
2. The department of labor requires that when submitting an Application for Alien Employment Certification the case file must contain two sets of original ETA 750’s Parts A and B. your case file contains only one set of original ETA750’s. The other set of 750’s in the case file are photocopies. ETA 750’s with photocopied signatures are not acceptable for processing. In order to continue processing the Application for Alien Employment Certification you must send an additional set of original ETA 750’s.
A copy of the Form ETA 750, parts A and B, have been returned in the event that any changes are necessary. The amended copies must be returned with your resubmission. Any amendments made to the ETA 750, Part A, must be initialed and dated by the employer: and any amendments made to the ETA 750, Part B, must be initialed by the alien, as appropriate.
It is the employer’s responsibility to submit the rebuttal in a timely manner directly to the certifying officer.
I got already my 7th year extension and it valid till Nov 2007. I spoke with my attorney and he seems to be positive, but he could only able to find two of the three candidates email correspondence.
Please let me know if you have faced similar situation or any suggestions. What is the possibility of my case gets approved?
wallpaper nice quotes on life and love.
alterego
04-12 08:39 PM
Thanks all. I called my lawyer, and she mentioned that there have been specific cases of the Neb Service Center rejecting I485 applications for internists while they are doing fellowships. I guess my plan would be to find a 'full time' position working a couple of nights a week in the same city where I am working as a fellow, and use that as proof of ongoing full time internist work.
I am not sure if they need just a letter, or a w2s also. I guess 'full time' is a very arbitrary word, and can be applied to more than 28-32 hrs a week, which is very easily doable.
Full time would be the standard definition of 40 hrs per week. It is clearly defined in the J1 waiver regulations for physicians and will likely be extended to the labor based applications as well since adjudicators are very familiar with the J1 waiver and NIW physician cases. Ultimately you have to decide whether the risk is worth it. W-2s as well as paystubs, as well as employers letters attesting to the scope of, and the full time nature of the work are often requested.
I am not sure if they need just a letter, or a w2s also. I guess 'full time' is a very arbitrary word, and can be applied to more than 28-32 hrs a week, which is very easily doable.
Full time would be the standard definition of 40 hrs per week. It is clearly defined in the J1 waiver regulations for physicians and will likely be extended to the labor based applications as well since adjudicators are very familiar with the J1 waiver and NIW physician cases. Ultimately you have to decide whether the risk is worth it. W-2s as well as paystubs, as well as employers letters attesting to the scope of, and the full time nature of the work are often requested.
aries
08-03 05:16 PM
whatever is the reason of revoking ? I just want to know if employer revokes an approved I140 withing 180 days of filling, will the employee know about it.
thanks!
Any answers to this questions ?
thanks!
Any answers to this questions ?
2011 mobile wallpapers love quotes.
CRAZYMONK
07-26 09:34 AM
I don't think the 2 question is valid as the GC is for future employment.
Hello,
If I read the USCIS news, then these are the questions I would ask myself and see if there is any serious legal concern...
1. Was I in non-pay status while working for VSG?
2. Is my job and location same as in my H-1B labor certification?
3. Are there any false documents submitted on my behalf to USCIS to support my visa petition?
If you answer no to all these questions, then legally you should be safe. However, as a further precaution, I would suggest to use AC-21 and move to another company. File a fresh labor (you can still claim the priority date from your old labor) and distance yourself from the fraudsters.
Hello,
If I read the USCIS news, then these are the questions I would ask myself and see if there is any serious legal concern...
1. Was I in non-pay status while working for VSG?
2. Is my job and location same as in my H-1B labor certification?
3. Are there any false documents submitted on my behalf to USCIS to support my visa petition?
If you answer no to all these questions, then legally you should be safe. However, as a further precaution, I would suggest to use AC-21 and move to another company. File a fresh labor (you can still claim the priority date from your old labor) and distance yourself from the fraudsters.
more...
nixstor
04-13 06:30 PM
Gurus,
Please help me guiding in my situation:
I have been on H1B for about 2 years, I came through desi consulting company. As usual there were no bench salary and very irregular payment during project duration also, I was not paid for about 50% of time.
I had switched to another employer couple of months back, My H1B approval with new employer is still pending. recently I had got letter from Department of Labor (DOL). They are trying to investigate my previous employer if he is complying with american competitiveness and workforce improvement act(ACWIA) of 1998.
They had sent me a questioner about previous employer about salary being paid etc.
I am not sure what should I be doing in this situation:
If I reply with all facts this might effect my pending H1B status for new employer.
If I write in a way that thing were as per LC then I am lieing, which I am not comfortable with.
Third Option could be that I do not respond at all
[They had mentioned that I am NOT required to respond.]
I am seeking help from experts and forum members, what should be I doing in this situation so that my H1B transfer do not get jeopradasided.
Thanks
Saurav
If you decide to reply, tell the truth.
Telling the truth about not getting paid will not get your new H1 extension into jeopardy. If you already filed for extension and do not have pay stubs for a period of time, you will possibly receive a RFE for lack of pay stubs. your response will help as an explanation of the employer's violations in case of a RFE and possibly can get you paid for the time you were not paid.
Please help me guiding in my situation:
I have been on H1B for about 2 years, I came through desi consulting company. As usual there were no bench salary and very irregular payment during project duration also, I was not paid for about 50% of time.
I had switched to another employer couple of months back, My H1B approval with new employer is still pending. recently I had got letter from Department of Labor (DOL). They are trying to investigate my previous employer if he is complying with american competitiveness and workforce improvement act(ACWIA) of 1998.
They had sent me a questioner about previous employer about salary being paid etc.
I am not sure what should I be doing in this situation:
If I reply with all facts this might effect my pending H1B status for new employer.
If I write in a way that thing were as per LC then I am lieing, which I am not comfortable with.
Third Option could be that I do not respond at all
[They had mentioned that I am NOT required to respond.]
I am seeking help from experts and forum members, what should be I doing in this situation so that my H1B transfer do not get jeopradasided.
Thanks
Saurav
If you decide to reply, tell the truth.
Telling the truth about not getting paid will not get your new H1 extension into jeopardy. If you already filed for extension and do not have pay stubs for a period of time, you will possibly receive a RFE for lack of pay stubs. your response will help as an explanation of the employer's violations in case of a RFE and possibly can get you paid for the time you were not paid.
.jpg "love quotes mobile wallpapers")
rsdang
10-30 04:05 PM
Dude you have the AP use it... I have travelled on AP multiple time no issues. I have an approved H1 which I dont use any more...
All the best
All the best
more...
bank_king2003
04-22 02:04 PM
So basically you are saying you cannot sue the people responsible for greencard problem.
I think the only option left is to either sue God or sue yourself for your bad luck.
Sorry if i was not clear. i meant to say that for visa recapture one cant file a lawsuit against USCIS but one can definately file a lawsuit on USCIS for following things if at all we can prove it
1) if quarterly soillover is a law and USCIS not doing it they are doing something against the law so we can file a lawsuit against it but again how can we prove that they are not doing quarterly spillover.
2) If USCIS doesnt use full numbers assigned for Green Cards and waste them you can again sue them for that but will it be succesfull or not that has to be researched.
3) That H1b employee - employer relation memo is a best example to file a lawsuit against them as there interpratation of the law was completely wrong but noone did it.
I think the only option left is to either sue God or sue yourself for your bad luck.
Sorry if i was not clear. i meant to say that for visa recapture one cant file a lawsuit against USCIS but one can definately file a lawsuit on USCIS for following things if at all we can prove it
1) if quarterly soillover is a law and USCIS not doing it they are doing something against the law so we can file a lawsuit against it but again how can we prove that they are not doing quarterly spillover.
2) If USCIS doesnt use full numbers assigned for Green Cards and waste them you can again sue them for that but will it be succesfull or not that has to be researched.
3) That H1b employee - employer relation memo is a best example to file a lawsuit against them as there interpratation of the law was completely wrong but noone did it.
2010 Love
cox
October 23rd, 2005, 08:59 AM
Hi Michael, nice shots. It's easy to see that you brought the discipline and hard work of your nature work to the studio. What was your lighting setup? Flash? strobes?...
Thanks, Kevin. I'm somewhat embarassed, as I did not use any lighting setup, so your attribution of hard work is, I fear, a little misplaced. I have this house with full floor-to-ceiling windows, and was using natural morning light, diffused by the fog that has hung over the bay for the last week in the AM. I used the camera's meter, either spot or center weighted, with manual bracketing when I thought that was insufficient, as was the case with the wreath & red roses.
...I would be interested in knowing the shooting parameters of these shots, what lenses used, etc...
I was using the 1DMII, and three lenses; the 50mm f/1.8, 100mm f/2.8 Macro, and my newly purchased 16-35mm f/2.8L. Most important was the Manfrotto tripod that allows nearly infinite positioning flexibility. As I said before, I made a cheesy PVC pipe frame and welders clips to hang backgrounds (<10 min fabrication time, <$10). All cases used low f stops, 2-6, & long exposures at low ISO for better quality. I was using the low f stops to help hide the imprefections in the background and give the soft focus effect the customer is looking for.
Good luck! I'm off to the Islands for a week.
I hope islands far from caribbean hurricanes!!
Thanks for the input, all. I suppose that I ought to look at getting some lights... Since I was using natural light, we (customer & I) didn't finish yesterday, and I will have to do the last pieces today (about 2 dozen total). That will also allow me to go over contact sheets with her.
Thanks, Kevin. I'm somewhat embarassed, as I did not use any lighting setup, so your attribution of hard work is, I fear, a little misplaced. I have this house with full floor-to-ceiling windows, and was using natural morning light, diffused by the fog that has hung over the bay for the last week in the AM. I used the camera's meter, either spot or center weighted, with manual bracketing when I thought that was insufficient, as was the case with the wreath & red roses.
...I would be interested in knowing the shooting parameters of these shots, what lenses used, etc...
I was using the 1DMII, and three lenses; the 50mm f/1.8, 100mm f/2.8 Macro, and my newly purchased 16-35mm f/2.8L. Most important was the Manfrotto tripod that allows nearly infinite positioning flexibility. As I said before, I made a cheesy PVC pipe frame and welders clips to hang backgrounds (<10 min fabrication time, <$10). All cases used low f stops, 2-6, & long exposures at low ISO for better quality. I was using the low f stops to help hide the imprefections in the background and give the soft focus effect the customer is looking for.
Good luck! I'm off to the Islands for a week.
I hope islands far from caribbean hurricanes!!
Thanks for the input, all. I suppose that I ought to look at getting some lights... Since I was using natural light, we (customer & I) didn't finish yesterday, and I will have to do the last pieces today (about 2 dozen total). That will also allow me to go over contact sheets with her.
more...
bleutuna
06-06 10:26 PM
Soul's just sucked so **** bad :love:
That transition between pages was maddening :hair:
:pope:
That transition between pages was maddening :hair:
:pope:
hair love quotes and wallpapers.
bbenhill
07-09 05:15 PM
PM me ur email address. I will send u the reply via email :-)
Thx
1. My parents included their Indonesian bank statement in rupiah. And they went to US embassy in Jakarta, their hometown. Does it make a difference to go to other city after they got rejected twice? If so, which one?
2. I had never gone back to Indonesia since I got the asylum. I'm not supposed to although I have already got my greencard. In fact, VO asked them if I ever went back to Indonesia. And my parents said no.
3. I didn't include my US bank statement because my parents self-sponsor themselves. I don't have much anyway to sponsor them.
Please let me know your advice. Thank you so much.
Thx
1. My parents included their Indonesian bank statement in rupiah. And they went to US embassy in Jakarta, their hometown. Does it make a difference to go to other city after they got rejected twice? If so, which one?
2. I had never gone back to Indonesia since I got the asylum. I'm not supposed to although I have already got my greencard. In fact, VO asked them if I ever went back to Indonesia. And my parents said no.
3. I didn't include my US bank statement because my parents self-sponsor themselves. I don't have much anyway to sponsor them.
Please let me know your advice. Thank you so much.
more...
.jpg "love quotes wallpapers for")
gcformeornot
05-15 08:36 AM
who think if they close their eyes, their problems will go away....:D
hot 2010 love quotes wallpaper
kondur_007
10-13 03:09 PM
Is it mandatory to wear business formal? I am going to get visa stamping with my wife, she is applying for H4.
Thanks!
I wore a T-shirt and Jeans; they did not ask me any questions.
No need to be "formal"; especially if you are going for re-stamping or already living in US. When you go back to your home country, it is "vacation" for you and so you are normally going to be casual.
Good Luck.
Thanks!
I wore a T-shirt and Jeans; they did not ask me any questions.
No need to be "formal"; especially if you are going for re-stamping or already living in US. When you go back to your home country, it is "vacation" for you and so you are normally going to be casual.
Good Luck.
more...
house Death quotes wallpaper from
laborpains
03-18 08:21 AM
Isn't EAD for unrestricted employment as long as your primary job is similar to what was in the labor application?
What if the one's priority date becomes current and USCIS asks for proof of employment? Wouldn't the application be denied?
Hello,
My 2-cents:
1. Your EAD is for unrestricted employment till the AOS is resolved (so, it is not tied to your labor petition)
2. Your AP is a travel document to allow you to travel while AOS is pending (again, not tied to employment)
As such, for all legal purposes, you should be able to pursue education full time. However, any IO at entry post has authority to ask you questions beyond what is legally required, which many a times, includes 'are you still employed with the petitioner'.
This is the tricky part... if the IO has good knowledge of the laws, he would let you in 'cause your petition is for the future job, but a wrong IO can twist and turn the laws to suit his/her point of view and land you in unnecessary trouble.
However, in 99% of the cases, the trouble may mean a few more anxious hours at the port of entry and nothing more. Hope you are able to pursue your education, all the best! :)
What if the one's priority date becomes current and USCIS asks for proof of employment? Wouldn't the application be denied?
Hello,
My 2-cents:
1. Your EAD is for unrestricted employment till the AOS is resolved (so, it is not tied to your labor petition)
2. Your AP is a travel document to allow you to travel while AOS is pending (again, not tied to employment)
As such, for all legal purposes, you should be able to pursue education full time. However, any IO at entry post has authority to ask you questions beyond what is legally required, which many a times, includes 'are you still employed with the petitioner'.
This is the tricky part... if the IO has good knowledge of the laws, he would let you in 'cause your petition is for the future job, but a wrong IO can twist and turn the laws to suit his/her point of view and land you in unnecessary trouble.
However, in 99% of the cases, the trouble may mean a few more anxious hours at the port of entry and nothing more. Hope you are able to pursue your education, all the best! :)
tattoo love quotes mobile wallpapers
sanju_eb3
02-26 09:33 AM
If I were you, I would take start with something "less technical" in the IT field like testing. You can learn a tool or two (example: Mercury, Rational etc) and basic methodology about planning, executing and monitoring testing. You have your background in HR and can use your functional skills to add value to any HR enterprise implementation.
You can then move to more technical side of the IT fields with configuration of any of the major enterprise tools like others have suggested - Peoplesoft, SAP etc.
You can then move to more technical side of the IT fields with configuration of any of the major enterprise tools like others have suggested - Peoplesoft, SAP etc.
more...
pictures mobile wallpapers love quotes.
ragz4u
04-13 10:52 AM
Will IV be trying to campaign/lobby against the 180 day delay?
90 days is a US law for every bill. Again, I don't see what IV has to do with that!
The other 90 days is because of amendment. Unfortunately this amendment was unanimously approved by the SJC. Can't see how IV can campaign against something like this too! And I think its prudent to wait 3 more months than rankle some lawmaker about this. We need publicity, but not negative publicity!
In any case, we will stick ONLY to our agenda.
90 days is a US law for every bill. Again, I don't see what IV has to do with that!
The other 90 days is because of amendment. Unfortunately this amendment was unanimously approved by the SJC. Can't see how IV can campaign against something like this too! And I think its prudent to wait 3 more months than rankle some lawmaker about this. We need publicity, but not negative publicity!
In any case, we will stick ONLY to our agenda.
dresses mobile wallpapers love quotes.
kumjay
06-28 03:58 PM
Didn't you earn all the dollars in this country? Then where is the pain man? Remember Geeta --- Jo liye Yehin pe liye, Jo diya yahin pe diya (Whatever I got I got here, Whatever I gave, I gave here)....so think that and write checks to Lawyer, Doctor, USCIS. I hope Geeta will reduce your pain.
more...
makeup hair mobile wallpapers of
fide_champ
08-04 05:41 PM
Please see my answers inside:
I came to US in March 2007 on L1B, mean time applied for H1b during April 2008 which got approved with COS effective from Oct 1 2008,
I could not work on H1b for some reasons, continued work on L1 until end of may 09 , went back to india during last week of May 2009 and returned in a month time (last week of June 09) with same L1 visa,
Now I have a valid I94 fo L1 until Feb 2010, also H1B I94 says valid until 2011 which I assume is no more valid due to re-entry on L1 n offcourse never having worked on H1b till date.
Now I would like to take up H1B in a month time, following are my questions
1. I assume that my employer need to apply for COS from L1-H1 now (form I-539) correct me if iam wrong,also is it legal to work while COS approval is in progress?
Ans: You cannot work for new employer while COS is in progress. You can do that during H1 transfer but not during COS from L1-H1.
2. Is there a premium processing for COS? to make sure I get approval first and then start working,how long does it take to process premium and what is the typical time frame for normal one?
Ans: COS is eligible for premium processing. If your client is waiting, better go for premium processing as getting a client is more harder these days than getting a visa.
3. My family is back in India, are they legal to travel during my COS being in progress with necessary stamping ? This is in case iam legal to work while COS is in progress, or
you recommend me getting them before COS is initiated with there L2 visa n then apply COS for them too ? Risk here is if COS is not approved for some reasons everyone have to leave
Ans:It's better to get your family here first and then apply for COS. If you change your status to H1, then your family will have to get H4 stamped before they can enter USA. That can be a problem sometimes if your company is not a well established one. They could avoid the H4 stamping and the hassles that comes with it(221g processing).
!
I came to US in March 2007 on L1B, mean time applied for H1b during April 2008 which got approved with COS effective from Oct 1 2008,
I could not work on H1b for some reasons, continued work on L1 until end of may 09 , went back to india during last week of May 2009 and returned in a month time (last week of June 09) with same L1 visa,
Now I have a valid I94 fo L1 until Feb 2010, also H1B I94 says valid until 2011 which I assume is no more valid due to re-entry on L1 n offcourse never having worked on H1b till date.
Now I would like to take up H1B in a month time, following are my questions
1. I assume that my employer need to apply for COS from L1-H1 now (form I-539) correct me if iam wrong,also is it legal to work while COS approval is in progress?
Ans: You cannot work for new employer while COS is in progress. You can do that during H1 transfer but not during COS from L1-H1.
2. Is there a premium processing for COS? to make sure I get approval first and then start working,how long does it take to process premium and what is the typical time frame for normal one?
Ans: COS is eligible for premium processing. If your client is waiting, better go for premium processing as getting a client is more harder these days than getting a visa.
3. My family is back in India, are they legal to travel during my COS being in progress with necessary stamping ? This is in case iam legal to work while COS is in progress, or
you recommend me getting them before COS is initiated with there L2 visa n then apply COS for them too ? Risk here is if COS is not approved for some reasons everyone have to leave
Ans:It's better to get your family here first and then apply for COS. If you change your status to H1, then your family will have to get H4 stamped before they can enter USA. That can be a problem sometimes if your company is not a well established one. They could avoid the H4 stamping and the hassles that comes with it(221g processing).
!
girlfriend love you quotes wallpaper,
.jpg "love quotes wallpapers for")
irfankhan25
04-06 04:33 AM
You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.
When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file
Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder
In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects
Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names
Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups
Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types
Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock
Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content
If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend
The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text
Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles
The following Illustrator text effects create individual paths when imported into Expression Blend.
Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects
Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients
Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes
Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)
This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.
hairstyles love quotes wallpapers for
.jpg "love wallpapers for mobile")
priti8888
10-02 12:30 PM
--------------------------------------------------------------------------
In June/July 2007 they allocated visa numbers to various applications based on RD.
Say Mr A with a PD of 2004 applied for 485 on July 23.
But Mr B with a PD of 2005 applied for 485 in 2005 or anytime before July 2007.
Mr B may be assigned a visa number and you will see his aproval anytime from July-Oct 2007. Since he already applied 485 , his name check, FP, etc is clear and case is pre-adjudicated.
Therefore, inspite of the fact that Mr B 's PF is not current, you will still see approvals in August, sept, oct.
In June/July 2007 they allocated visa numbers to various applications based on RD.
Say Mr A with a PD of 2004 applied for 485 on July 23.
But Mr B with a PD of 2005 applied for 485 in 2005 or anytime before July 2007.
Mr B may be assigned a visa number and you will see his aproval anytime from July-Oct 2007. Since he already applied 485 , his name check, FP, etc is clear and case is pre-adjudicated.
Therefore, inspite of the fact that Mr B 's PF is not current, you will still see approvals in August, sept, oct.
vikramy
08-17 10:16 AM
I recently transferred my license week back. I just showed my EAD. He cheked online and gave license based on that. At the end he took 485 photo copy.
This is at Dublin DMV.
Hi Guys,
I am on H1B and my wife is working using her EAD. Like most people on here we applied in the July 2007 rush.
Now her licence in PA was expiring and we went to renew it and provided ALL necessary documents such as Passport, I-94, current and future EADs. However at the very end after about half an hour of providing documents, the DMV guy said that the system needed "more info" and that he would have to fax everything to Harrisburg who would then contact the INS for the missing info and we would get some "letter" from the DMV.
Has anyone faced a similar issue in PA before? If so how soon after did they receive this letter? Is there anything I can do to expedite the process such as contacting my local Sentator/Congressman's office? We have a small baby and my wife needs to drive to go to work.
Thanks.
This is at Dublin DMV.
Hi Guys,
I am on H1B and my wife is working using her EAD. Like most people on here we applied in the July 2007 rush.
Now her licence in PA was expiring and we went to renew it and provided ALL necessary documents such as Passport, I-94, current and future EADs. However at the very end after about half an hour of providing documents, the DMV guy said that the system needed "more info" and that he would have to fax everything to Harrisburg who would then contact the INS for the missing info and we would get some "letter" from the DMV.
Has anyone faced a similar issue in PA before? If so how soon after did they receive this letter? Is there anything I can do to expedite the process such as contacting my local Sentator/Congressman's office? We have a small baby and my wife needs to drive to go to work.
Thanks.
franklin
10-10 02:28 PM
If I remember correctly, there is information on the paperwork that you receive your card with that states something along the lines of:-
"Please check the information on the card, if any of it is correct please call XXX number / write to us at YYY"
Have you tried that?
"Please check the information on the card, if any of it is correct please call XXX number / write to us at YYY"
Have you tried that?
No comments:
Post a Comment